Magnetic Separation Process

The Description and Function of Magnetic Separation Process

The magnetic selection process is a wet and dry joint dressing process for the separation of magnetite, mainly used for three-level magnetic separating processing. The magnetic field strength of the magnetic separation is 400~1200GS while the magnetic drum rotating speed is about 60~320 rings/minute.

Wet material can be made into iron concentrate powder by dehydration. Generally, ore with an iron content of 35% can be made into concentrate powder with an iron content of 68-70% by this magnetic separation process. The wet and dry joint technology method can achieve ore utilization up to 90% and the magnetic separation process can save water, reduce costs and pollution. The magnetic separation process is equipped with a dust collector, which won't cause air pollution so the magnetic separation process is a pollution-free method with creative technology, high efficiency, and high quality.

Magnetic Separation Process Advantage

1. The magnetic separation process is advanced in technology, and the hammer crusher and magnetic separator are used with a high degree of automation to reduce the manual operation;

2. The utilization rate of ore can reach 90%, the water consumption in the process is small, the cost is saved, and the high-profit space can be obtained;

3. The magnetically selected dust is collected by the dust removal device and will not cause air pollution. It is a creative process with high production efficiency, good product quality, and no environmental pollution.

4. Low environmental requirements for the job site, high yield, and low consumption even if the environment is not good.