Measures to Solve Abnormal Shutdown of Stone Crusher in Winter

Measures to Solve Abnormal Shutdown of Stone Crusher in Winter

It's very cold in winter, and when the crushing plant, just like stone crusher, works in a special environment, it is inevitable to meet a variety of problems. According to the customer’s response, abnormal outage is a common one of the failures, also is a fault that will have a great impact on stone crusher. Therefore, today we will give a brief analysis to the reasons and measures of stone crusher’s abnormal shutdown in winter.

At first, before the stone crusher starts work, it is necessary to ensure that the voltage of the work site meets the requirements of the crushing production line, especially in winter. It is very important to ensure voltage stability in the case of low temperature in the working environment. When the voltage is low, the stone crusher will be unable to break, and the stone crusher will be forced to stop, so the preparation before the work must be more careful to ensure the safety.

Secondly, abnormal shutdown may also be caused by materials clogging. Materials clogging can be divided into two cases. One is that the size of material is larger, and the other is that it does not meet the uniform feed required by the operating code. When the material is clogged seriously, it will not only cause the stone crusher to stop abnormally, but also cause the elbow plate to be broken. Therefore, it is necessary to pay attention to the uniform feeding in the process of work, to avoid blocking and cause the downtime of the stone crusher.

Finally, when the conveyor belt or parts are too loose, it can cause the stone crusher to stop, which is closely related to the daily maintenance of the stone crusher, and is also a problem to be paid attention to in the work. Whether the conveyor belt is too loose or too tight, it will have an impact on the stone crusher. When the conveyor belt is too loose, the crusher will stop working without power, and when the belt is too tight, it will break. Therefore, before the stone crusher works, the tightness of the conveyor belt and the whole inspection should be checked.