The Method of Adjusting the Feeding Quantity of Rotary Kiln

The Method of Adjusting the Feeding Quantity of Rotary Kiln

In the operating system of the rotary kiln, the feeding rate of the rotary kiln is very important. If the feeding rate is too large or too small, it will seriously affect the operation efficiency of the rotary kiln, and even failure. Therefore, it is indispensible to control the feeding rate.

Generally speaking, the adjustment of ordinary rotary kiln feeding amount is based on the thickness of the material layer in the kiln, which is to maintain proper load rate of kiln material. The feeding machine and the kiln speed keep synchronization, to maintain the material layer of kiln is homogeneous. About regulation of decomposition furnace system for feed quantity, you must take many factors into consideration, such as raw material, kiln shell, decomposition furnace, etc.

The feeder machine of the decomposition furnace should change with the corresponding change of the kiln. The speed of the kiln changes can keep the material layer in the kiln.

Controlling the feeding quantity in the appropriate range is the best way to ensure the working efficiency of rotary kiln. If the feed quantity is not appropriate, it is required to adjust the quantity in time.